日产无码中文字幕av,久久日本三级韩国三级,亚洲玖玖爱

1200℃Max Dual Sliding Tube Furnace with 50 mm Tube Flanges for TCVDOTF-1200X-S-50-DFSL-洛陽賽特瑞高溫實驗爐Sintering Furnace

耐火材料檢測設備回轉管式爐坩堝爐熱震爐高溫燒結爐石墨燒結爐定制電爐熔煉爐箱式電阻爐/箱式馬弗爐義齒爐高溫管式爐真空爐

1200℃Max Dual Sliding Tube Furnace with 50 mm Tube Flanges for TCVDOTF-1200X-S-50-DFSL

別稱：
類型：高溫電爐系列
溫度：
規格：

產品詳情

OTF-1200X-S-50-DFSL is a dual slidable furnace on the rail.It is a tool for thermal CVD with 2" ODx55"L Quartz tube amp; flanges and max 1200℃achievable working temperature. Two 2" tube furnaces can be slide on the sliding rail to find positions for source materials thermal evaporation/sublimation and film deposition. Sliding the furnace from one side to another can achieve max. heating and cooling rates up to 100°C/min. Optional motorized sliding, MFC gas delivery and RF Plasma generator are available to build a flexible TCVD system easily at low cost.

SPECIFICATIONS

Furnace Structure

、Both furnaces are double layer steel structure with 1200℃max. working temperature 、Each Furnace has 200mm heating zone and 60 mm long constant temperature zone 、One pair of sliding rails are installed on bottom of furnace, which allows furnace to be manually moved from side to side with max sliding distance 400 mm. 、Vacuum flanges isinstalled for immediate use.

Power of furnace

2.5 KW in total

Voltage

AC 208-240V Single Phase, 50/60 Hz, 20 A air breaker required

Max. Temperature

1200℃(＜1 hour)

Continuous Temperature

1100°C

Heating amp; Cooling Rates

Heating Rate:15°C/sec (RT - 150°C);10°C/sec (150℃- 250°C); 7°C/sec (250℃- 350°C); 4°C/sec (350℃- 500°C); 3°C/sec (350℃- 550°C); 2°C/sec (550℃- 650°C); 1°C/sec (650℃- 800°C);0.5°C/sec (800℃- 1000°C);

Cooling Rate:15°C/sec (1000 - 950°C);10°C/sec (950℃- 900°C);7°C/sec (900℃- 850°C);4°C/sec (850℃- 750°C);2°C/sec (750℃- 600°C);1.5°C/sec (600℃- 500°C);1°C/sec (500℃- 400°C);0.5°C/sec (400℃- 300°C);

Note:The max heating and cooling rate is achieved by pre-heat one side of processing tube to the target temperature and then slide the furnace to the other side. You may choose to place the sample in the pre-heat area or not.

Heating Zone Length

200mm( ~8") for each furnace

Constant Temperature Zone

60 mm (+/-1°C 400-1200°C)

Heating Elements

Fe-Cr-Al Alloy doped by Mo

Processing Tube Size

High purity fused quartz tube

Size: 50mm O.Dx44mm I.D x1400 mm Length

Temperature Controller

、Two furnaces are PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time. 、Built-in over temperature alarm and protection allows for operation without an attendant. 、Two K-type thermal couples are included. 、Optional: o The furnace may be operated by PC by installing control module. Please order an MTS-02 control module at extra cost. o If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer (laptop) from us to avoid software installation problems. For more information please click here.

Temperature Accuracy

+/ - 1°C

Vacuum Flanges

、Stainless steel vacuum flanges with a vacuum gauge ( click picture bottom left to see details) are installed on both ends of the tube with heavy duty support. 、Optional flange with a KF25 vacuum port and digital vacuum gauge is available at extra cost. ( click picture bottom right to see details)

Sliding Rails / Table

、Double sliding rail made by Cr-plated steel 、Sliding length: 1200 mm 、Two slide stopping clamps are included for holding the position of the furnaces.

Vacuum Level

、Limited by pump ( pump is not included, click on pictures to order ) o 10E-5 torr can be achieved via molecular pump o 10E-2 torr can be achieved via a mechanical pump.

Optional for upgrate

、Motorized sliding is available upon request ( please click bottom left picture ) 、1-9 chaanel gas mixing and delivery moudles is availle ( click the picture 2nd picture in below to order ) 、100W - 500W RF plasma generator for plasma enhanced processing is available upon request ( click picture bottom right to see detail ). This module allows you build your own Plasma Enhanced Thermal CVD system

Dimensions

、Furnace: 340x300x400 mm 、Total:1600x430x500 mm ( furnaces + sliding ) 、

Net Weight

~ 80 Kg

ShippingPackage Size

70"x45"x45" (inch)

Shipping Weight

300 lbs

Warranty

One year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products below).

Laptop, software amp; WiFi Control(Optional)

、Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. 、 Temperature Control System (EQ- MTS01)enables user to edit temperature profile, manage heat- treatment recipe, record and plot data for STR-furnaces. 、A wireless remote control provides up to 300 meters operating range. 、Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
、Note: The software is only compatible with Yudian Temperature Controller

Compliance

、CE Certified 、All electric components ( gt;24V) are UL / MET / CSA certified 、The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.（ please click marks below to learn details )

Application NotesClick here to learnthe installation of a gas regulator

、Tube furnaces with quartz tubes are designed for using under vacuum and low pressure ＜ 0.2 bar / 3 psi / 0.02 MPa 、Attention: A two-stage pressure regulator must be installed on gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator. 、The flow rate for gasses should be limited to ＜ 200 SCCM (or 200 ml/min) for reducing thermal shocks to the tube 、Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C 、Click here to learn How to set up quartz/ ceramic tube and vacuum flange for STR-Tube furnace. 、After CVD, the graphene must be transferred from the metal catalyst to another substrate for most applications. By using the graphene transfer tape, the residue can be low.

Warning

、Fast sample cooling can be achieved by sliding the heating chamber away. Please wear protective gears such as heat resistant suit amp; gloves if you intend to do so. DO NOT TOUCH THE TUBE SURFACE WHEN IT IS HOT!

Operation Instructions

import(/layout/smh/menubottom.html);
生產廠家哪家好？1200℃Max Dual Sliding Tube Furnace with 50 mm Tube Flanges for TCVDOTF-1200X-S-50-DFSL-洛陽賽特瑞高溫實驗爐Sintering Furnace為專業的生產廠家，具有多年的研發與生產經驗、質量穩定可靠 TAG:

洛陽賽特瑞高溫實驗爐Sintering Furnace是高溫爐_高溫馬弗爐_實驗電爐_高溫電爐_真空氣氛爐_熱震實驗爐_箱式電爐_負極材料預碳化箱式氣氛爐_石墨化爐_高溫電阻爐_升降電爐_工業電爐等設備和高溫電爐配件生產廠家