賽特瑞? 智能實驗裝備供應商
集研發設計、銷售、售后維保專業服務商
聯系電話：
聯系電話：
熱搜關鍵詞： 理瓶機 STR-M12-17 耐火材料熱線法導熱儀 耐火性能試驗爐
產品型號：Dual Heating Zone High Pressure Verticle Tube Furnace with Super-Alloy Tube upto 1100℃_500mLOTF-1200X-HP-70-V
電爐類型：高溫電爐系列
電爐規格：
加熱溫度：
電爐系列：高溫馬弗爐
應用范圍：。
OTF-1200X-HP-70-V is a high-pressure verticle split tube furnace with two heating zones. The processing tube is made of 70 mm OD. Ni-based superalloy with 1100oC max working temperature, which is designed for growing crystal via the high-pressure hydrothermal method.
| Working Pressure vs. Working Temperatue | 、Pressure calculation based on safety factor 3 for 6000 hours service life o 200 Bar max. at ≤800°C o 150 Bar max. at ≤900°C o 100 Bar max. at ≤1000°C o 50 Bar max. at ≤1100°C |
| Working Gases | 、Inert gas and oxygen 、No hydrogen or any flammable gas |
| Heating Temp. | 、1100℃max.for ＜ 1hr 、1000℃for continuous |
| Heating Rate | ≤10°C/min |
| Heating Element | Fe-Cr-Al Alloy doped by Mo |
| Heating Zone | 、Two heating zones: 200mm + 200mm 、Total heating zone length： 400mm 、Constant temp. zone: 175 mm ±2°C |
| Temperature Control | 、Three precision digital temperature controller with 30 segments programmable 、PID controlling method with the protection of over-temp. and thermocouple break. 、Temperature stability: ±1°C 、PC control software and interface is available at additional cost, please click the bottom left image to order. |
| Thermocouple | ?Omega 3mm OD K Typewith high-temperature tolerance (220°C) connector |
| Positive Pressure Sensor | 、One digital pressure transducer installed in high-pressure flange 、One pressure controller is included. the release valve will automatically open when the pressure reaches setting pressure. 、Pressure Measurement Range: 0~15Mpa |
| Process Vessel | 、Nickel based superalloy GH747 (Click to download GH747 nickel based alloy datasheet)with diimension of Φ70 OD × Φ35 ID ×526 L mm, Nominal Capacity: 500 ml 、Attention: Processing Tube is a consumable part, you can click the picture below to order replacement or a spare one. 、The optional torque wrench is available hereto avoid overtightening the flange bolts. 、A small quartz or Alumina boat should be used to load the sample inside the vessel. Please click the link below to order separately. Never place the sample directly onto the vessel without a crucible. Vessel service-life could be reduced significantly if you do so. ?You may use gold or nickel foil to wrap the crucible boat to minimize the contamination to the pressure vessel. 、Warning: Never put sample inside tube directly without crucible or isolated foil to avoid sample react with tube alloy. |
| Flange and Fitting | 、A pair of 63mm CF type flanges is included (w/ high-pressure valve and 1/4 tube fitting) 、2 pcs Copper o-rings are included ( spare copper O-ring is available as consumable. 、The flange is cooling by forced air via aluminium heat-sink |
| Optional Parts( with extra cost ) | 、You may order Heavy Duty Rotary Vane Vacuum Pump (7.8 CFM -240 L/m) - EQ-YTP-50for experiment under vacuum condition 、Please consider the Turbomolecular Vacuum Pump Station (up to 1E-7 mbar) - EQ-PV-HVS2 for high vacuum level 、Gas flow control system is available upon request ( see picture below right) |
| Voltage | AC 208 - 240V 50/60Hz |
| Power | 3 KW(20A breaker required) |
| Dimension | 900×600×1330 mm |
| Operation Instruction | |
| Application Notes | 、The heating temperature must be limited by the certain pressure level due to vessel material strength.Please refer to the specifications. 、The pressure is increasing while the temperature is rising during operation. So you need to calculate the pressure changing towards your target temperature and set a safe value of pressure during processing. |
| Safety Notes | 、Ni-based Superalloy ( Waspaloy or equivalent) is a reliable processing tube which can be used under high temperature and high pressure. It has excellent ductility and tensile property so only creep deformation happens under overpressure destruction test and following by a crack formed (usually at the hot zone at the center of the tube) to release the pressure. Brittle fracture won’t happen in the overpressure destruction test which means no tube explosion will happen under overpressure 、The PIC at left shows left Ni-based Superalloy processing tube under overpressure test 、Attention: For the use with flammable, toxic or corrosive gases, you must contact STR- engineering group for the consultation to know all the prerequisites and precautionary measures. 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator. |
滑軌爐 1200℃大口徑滑軌爐 管式快速退火爐 滲碳爐爐蓋總成
免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考。可能由于更新不及時，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。 內容專業性較強，僅供參考學習，請勿直接采用。本站部分圖片和文字來源于網絡收集整理，僅供學習交流，版權歸原作者所有，并不代表我站觀點。本站將不承擔任何法律責任，如果有侵犯到您的權利，請及時聯系我們刪除。
洛陽賽特瑞高溫實驗爐Sintering Furnace始終致力于尖端高溫及加熱產品綜合解決方案。憑借整個集團雄厚的綜合實力、優秀的技術、完善的服務體系，成就了洛陽賽特瑞高溫實驗爐Sintering Furnace可靠的品質。我們生產的質量好，效率高，節能環保，深受國內外廣大客戶的歡迎。價格多少錢一臺? 需要根據詳細技術方案確定
是由供應商洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,洛陽賽特瑞高溫實驗爐Sintering Furnace可以加熱到度
是由生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,可以聯系我們獲得電子版操作說明，以及遠程視頻指導
隨著國內企業生產研發以及高校科研的飛速發展，的需求量日益增加。廠家哪個好?銷售的公司不少，但購買的時候一定要特別注意，要選擇有真正實力，質量可靠，且有專業售后服務團隊的真正生產廠家。本生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace以高標準、高要求的研發生產理念，確保設備的可靠性！
外殼由冷軋鋼板折,表面經高速拋丸后靜電噴塑。
可拆卸組合面有密封墊、環、圈、帽。
推出新型設計方案，結構合理、通用性強、使用壽命高。
可按客戶要求定制。
洛陽賽特瑞高溫實驗爐Sintering Furnace目前共有90余種實驗室設備產品：高溫馬弗爐、、高溫管式爐、氣氛爐、真空爐、熱震爐、結晶爐、火試金爐、箱式爐，常規品足量半成品儲備，快至3個工作日發貨，定制品承諾按期交貨；可根據客戶對產品環境測試的需求，為客戶量身定制性價比高的解決方案及非標定制服務。
Phone
微信Wechat
郵箱Emailsaiterui#qq.com 
電話：
郵件：
